Black Mountain Stone Wall and Steps
Written by Marc Archambault
We spent about a month this summer building steps around a recently completed modern house in Black Mountain, North Carolina. Designed by architect Scott Huebner of Brickstack Architects, the house has majestic views from its steep lot. Our primary job was to provide access for the homeowners so that they can tend their gardens and landscape. Really it was more like backcountry trail construction than our typical more finessed style of work. However, the real fun was when we got to replace a very sloppily built boulder wall at the driveway.
To hear it described, the wall in question was a last-minute add-on. It certainly looked very thrown together, with large gaps, no attention paid to bonding, and lots of gravel between the stones as if using ball bearings as a substitute for mortar. It was nothing to look at, for sure. Adding insult to injury, other tradespeople had mistreated it. Someone had smeared a lot of polyurethane on a few stones, presumably cleaning their brushes. There were similar concrete stains in other locations. All in all, it was a very ugly wall.
So we took it down and rebuilt it. I would say itâ€™s built in the style of our typical walls, but at an uncommon scale. Some of these pieces weigh over 1000 pounds and it required an excavator â€“ a small one â€“ to help move the material into place. The stones with the stains were either removed or turned around to hide the mess. We used hammer and chisel and- as appropriate- the big saw to sweeten the fits and to ensure good bonding. The previous wall had no attention paid to batter or a clean line to the face of the whole wall. We took care of that and the results are pleasing.
I should have done a before and after post, but the original wall so ugly I never thought to take a picture of it. If I find a picture, I will surely add it.
To me, true craft is about caring. The devil is in the details.
Special thanks to Fred Lashley for operating the excavator on this project.